Mitsubishi AA104VC02 10.4 Inch TFT LCD Module

The Mitsubishi AA104VC02 LCD Module is a 10.4-inch industrial TFT-LCD panel designed for professional equipment, industrial systems, control interfaces, and replacement display applications. It features a 640 × 480 VGA resolution, 4:3 aspect ratio, and 76 PPI pixel density, providing a practical display format for equipment using traditional VGA-resolution interfaces.

The AA104VC02 uses a-Si TFT-LCD technology with a TN, normally white, transmissive display mode and supports 262K colors. With a typical brightness of 430 cd/m² and a 500:1 contrast ratio, the panel provides clear image reproduction for a variety of industrial and embedded environments.

This Mitsubishi LCD module uses a CMOS 1-channel, 6-bit signal interface with a 31-pin connector and operates with a typical 3.3/5.0V LCD supply. The display uses two CCFL backlights with a specified life of approximately 50,000 hours and is supplied without a backlight driver.

Key Features

·        Brand: Mitsubishi

·        Model: AA104VC02

·        Display Size: 10.4 inches

·        Panel Technology: a-Si TFT-LCD

·        Resolution: 640 × 480 pixels (VGA)

·        Aspect Ratio: 4:3

·        Display Mode: TN, Normally White, Transmissive

·        Brightness: 430 cd/m² typical

·        Contrast Ratio: 500:1 typical

·        Supported Colors: 262K

·        Viewing Angle: 65/65/45/65° typical

·        Response Time: 10/30 ms typical (Tr/Td)

·        Interface: CMOS, 1 channel, 6-bit

·        Connector: 31-pin

·        Frame Rate: 60 Hz

·        LCD Supply Voltage: 3.3/5.0V typical

·        Backlight: 2 × CCFL

·        Backlight Life: 50,000 hours

·        Backlight Driver: Not included

·        Active Area: 211.2 × 158.4 mm

·        Outline Dimensions: 243 × 181.6 × 12.7 mm

·        Condition: Refurbished

·        Warranty: 3 months

Technical Specifications

*The product listing specifies the operating range as 20°C to 70°C, while other Mitsubishi AA104VC02 technical references list -20°C to 70°C. For replacement purchasing, verify the applicable datasheet and actual unit specification before installation.

10.4-Inch VGA Industrial Display

The Mitsubishi AA104VC02 provides a 10.4-inch display area with 640 × 480 VGA resolution, making it suitable for equipment designed around the traditional 4:3 display format. Its 211.2 × 158.4 mm active area provides sufficient viewing space for industrial menus, machine parameters, status information, measurements, and control interfaces.

430 cd/m² Brightness and 500:1 Contrast

With a typical luminance of 430 cd/m², the AA104VC02 provides good brightness for many indoor industrial and professional applications. Its typical 500:1 contrast ratio helps distinguish graphical elements, text, and interface information displayed on the screen.

TN TFT-LCD Technology

The panel uses TN, normally white, transmissive TFT-LCD technology and supports 262K colors. The viewing angle specification is 65° left, 65° right, 45° up, and 65° down, making it best suited to applications where the display is viewed primarily from the intended installation position.

CMOS Parallel RGB Interface

The Mitsubishi AA104VC02 uses a CMOS 1-channel, 6-bit interface with a 31-pin connector. This is an important consideration when using the panel as a replacement because matching the screen size and resolution alone does not guarantee compatibility.

Before installation, verify the connector type, pin configuration, signal format, power requirements, timing specifications, and host controller compatibility.

CCFL Backlight System

Unlike newer LCD modules that commonly use LED backlights, the AA104VC02 uses two CCFL lamps. The specified backlight life is approximately 50,000 hours, and the module is listed without a backlight driver.

For replacement applications, the existing equipment should therefore be checked for compatibility with the CCFL backlight system and its required inverter/driver arrangement.

Industrial and Replacement Applications

The Mitsubishi AA104VC02 can be considered for a variety of professional and industrial applications where a 10.4-inch 640 × 480 TFT display is required.

Typical applications include:

·        Industrial automation equipment

·        HMI and operator interfaces

·        Machine control systems

·        Industrial control panels

·        CNC and manufacturing equipment

·        Process monitoring systems

·        Instrumentation equipment

·        Embedded control systems

·        Factory automation equipment

·        OEM equipment

·        Legacy equipment refurbishment

·        Industrial LCD replacement applications

Its 4:3 format and VGA resolution can be particularly useful when maintaining or refurbishing older equipment designed around legacy display specifications.

Why Choose Mitsubishi AA104VC02?

The Mitsubishi AA104VC02 is a suitable option for buyers looking for an exact-model industrial LCD replacement rather than a generic 10.4-inch display.

Its 640 × 480 resolution, 4:3 format, 430 cd/m² brightness, CMOS interface, 31-pin connector, and CCFL backlight configuration make it appropriate for equipment designed around these specific display requirements.

For maintenance teams and industrial equipment users, using the correct model can help avoid unnecessary modifications to the existing display system.

Refurbished Mitsubishi LCD Module

The AA104VC02 listed for sale is a refurbished LCD module. Refurbished industrial displays can be useful when maintaining older machinery or legacy equipment where the original panel may no longer be readily available.

The listed product includes a 3-month warranty. Buyers should verify the condition, connector configuration, backlight performance, and physical specifications before installation.

Compatibility and Replacement Note

Before ordering the Mitsubishi AA104VC02 as a replacement, compare the following specifications with your existing LCD:

·        Exact model number

·        Display dimensions

·        Active display area

·        Mounting arrangement

·        Connector type

·        Number of connector pins

·        Pin configuration

·        Signal interface

·        Power supply requirements

·        Backlight type

·        Backlight driver/inverter requirements

·        Display resolution

·        Operating temperature requirements

A display should not be considered compatible simply because it has the same 10.4-inch size or 640 × 480 resolution. Electrical and mechanical specifications must also match.

Product Details

Product: Mitsubishi AA104VC02 LCD Module
Brand: Mitsubishi
Model: AA104VC02
Display Size: 10.4 Inch
Resolution: 640 × 480 VGA
Panel Type: a-Si TFT-LCD, LCM
Interface: CMOS, 1 channel, 6-bit
Connector: 31-pin
Backlight: 2 × CCFL
Condition: Refurbished
Warranty: 3 Months

Handling and Installation Precautions

LCD panels are delicate components and should be handled carefully during installation.

·        Do not scratch or apply excessive pressure to the front polarizer.

·        Switch off the power before connecting or disconnecting the LCD.

·        Do not touch or damage the connector pins.

·        Avoid bending, twisting, or tilting the interface connector.

·        Keep the LCD away from water and excessive moisture.

·        Do not drop or impact the panel against hard surfaces.

·        Do not attempt to open or modify the LCD module.

·        Confirm the signal and power connections before switching on the equipment.

·        Use the appropriate CCFL inverter/driver for the backlight system.

Frequently Asked Questions

What is the Mitsubishi AA104VC02?

The Mitsubishi AA104VC02 is a 10.4-inch a-Si TFT-LCD module with a 640 × 480 VGA resolution, TN normally white transmissive display mode, and CMOS 1-channel 6-bit interface.

What is the resolution of AA104VC02?

The Mitsubishi AA104VC02 has a 640 × 480 pixel VGA resolution and approximately 76 PPI pixel density.

What is the screen size of Mitsubishi AA104VC02?

The AA104VC02 has a 10.4-inch diagonal display size with an active area of approximately 211.2 × 158.4 mm.

What interface does the AA104VC02 use?

The panel uses a CMOS 1-channel, 6-bit interface with a 31-pin connector.

What is the brightness of the Mitsubishi AA104VC02?

The typical brightness of the AA104VC02 is 430 cd/m².

What type of backlight does AA104VC02 use?

The AA104VC02 uses two CCFL backlight lamps with a specified life of approximately 50,000 hours. The module is supplied without a backlight driver.

Is the Mitsubishi AA104VC02 an LED display?

No. The AA104VC02 uses a CCFL backlight system, not an LED backlight. It uses two CCFL lamps.

Is the Mitsubishi AA104VC02 suitable for industrial applications?

Yes. The panel is an industrial-oriented TFT-LCD module and can be used for equipment such as industrial control systems, HMIs, instrumentation, automation equipment, and legacy machinery, provided the electrical and mechanical specifications are compatible.

Is the Mitsubishi AA104VC02 refurbished?

The listing identifies this particular product as refurbished and specifies a 3-month warranty.

What is the operating temperature of AA104VC02?

The listing specifies an operating temperature of 20°C to 70°C and storage temperature of -20°C to 80°C. Some other technical references list a wider operating range, so buyers should verify the specification applicable to their exact unit before deployment.

Can AA104VC02 be used as a replacement LCD?

Yes, provided the replacement requirements match. Before installation, verify the exact model, dimensions, connector, pin configuration, interface, power supply, backlight system, and other electrical specifications.